Advantage
| Application | |||
|---|---|---|---|
| For medical, life preserver, outdoor, protective, shoes parts, ball, clothes, toys, infusion bed, water bags, industry and so on. | |||
| Specification | |||
|---|---|---|---|
| Thickness | 0.1mm~2mm | Thickness Tolerance | ±10% |
| Width | 1000~1370mm | Surface Style | Glossy and Matte |
| Length | 100mm~1000mm (or more) | Color | Natural, Black, White, Red, Yellow, Transparent |
| General Material Comparisons | |||||
|---|---|---|---|---|---|
| Polyurethane Films | Flexible Vinyl (PVC) | Low Density Polyethylene | Natural Rubber | Neoprene | |
| Hardness (Shore A) | 75-97 | 40-90 | 90-95 | 30-95 | 40-95 |
| Specific Gravity | 1.1~1.3 | 1.3~1.4 | 0.9~1.0 | 0.9~15 | 1.2 |
| Elongation (%) | 400~600 | 200~400 | 200~600 | 100~800 | 100~700 |
| Tensile (PSI) | 4~10 | 1~3 | 1~2 | 1~4 | 1~3 |
| Low Temp. Flex | Excellent | Fair-Poor | Good | Excellent | Good |
| Resistance to: | |||||
| Abrasion | Excellent | Fair | Poor | Good | Good |
| Tearing | Excellent | Fair | Poor | Good | Good |
| Oil | Good | Fair | Poor | Good | Good |
| Ozone | Excellent | Excellent | Excellent | Poor | Good |
| Water | Good-- Excellent | Good | Excellent | Good | Good |
| Heat Sealable | Yes | Yes | Yes | NO | NO |
| Heat Bond | Yes | Yes | Yes | NO | NO |
| Solvent Bond | Yes | Yes | Yes | NO | NO |
| Ultrasonic Bond | Yes | Yes | Yes | NO | NO |
| Thermoformable | Yes | Yes | Yes | NO | NO |
| Physical Properties | |||||
|---|---|---|---|---|---|
| Polyester base | Polyether base | ||||
| Tensile Properties (D638) | |||||
| Modulus @ 100% strain (psi) | 800 | 1000 | |||
| Modulus @ 300% strain (psi) | 1800 | 2000 | |||
| Modulus @ break (psi) | 7000 | 7000 | |||
| Modulus of elasticity up to 10% strain (psi) | 30 | 35 | |||
| Elongation @ break (%) | 400 | 450 | |||
| Set @ break (%) | 30 | 35 | |||
| Set @ 100% strain (%) | 3 | 5 | |||
| Tear Properties | |||||
| Die C (D624) pli | 425 | 400 | |||
| Split (D 1938) pli | 400 | 375 | |||
| Abrasion Resistance | |||||
| Mg. weight loss/1000 cycles1000 gmload, H18 (ASTM C501) (mg) | 70 | 30 | |||
| Maximum Service Temperature | |||||
| Continuous (℃) | -40~105 | -52~95 | |||
| Compression Properties (shape factor=0.56) | |||||
| Set, Method A, 22hrs.70℃(D395) (%) | 11 | 12 | |||
| Set, Method B, 22hrs.70℃(D395) (%) | 18 | 23 | |||
| Durometer (D2240) (Shore A) | 85 | 85 | |||
| Thermal Properties | |||||
| Melting Point Range (℃) | 182~204 | 176~198 | |||
| Specific Gravity (D792) | 1.20 | 1.14 | |||
| Yield Factors | |||||
| Square Feet/Pound/Ml. Thickness | 160.3 | 168.8 | |||
| Vapor Transmission Rates (E96) (Inverted @ 22±2℃ grams weight loss/100 sq. in./24hrs. @mil thickness) | |||||
| Distilled Water | 2.0 | 2.1 | |||
| Superunleaded gasoline | 4.7 | 20 | |||
| Humid Again Resistance (90% relative humidity at160℉/70℃) | Fair to poor | Excellent | |||
| Notice: These values are based on the test of our present laboratory test specimens. | |||||
****We cordially invite you to access our following website to know more about our
PU film-
Taiwantrade.com and iDealEZ.com uses analytical cookies and other tracking technologies to offer you the best possible user experience. By using our website, you acknowledge and agree to our cookie policy.
For more information on cookies or changing your cookies settings, read Taiwantrade & iDealEZ’s Privacy Policy.
