LEFT MENU

TPU Adhesive for shoes, TPU (Thermoplastic Polyurethane) Adhesive,TPU Footwear adhesive

Model No.
TPUA-760.TPUA-1560
Made in
Taiwan
Request for Quotation

    Your PU Factories in Taiwan

    Spec

    • Use:Footwear & Leather

    Key Features

    + TPU (Thermoplastic Polyurethane) for Solvent Based Adhesives

    + TPU (Thermoplastic Polyurethane) Adhesive

    + TPU Shoe Adhesive

    + Solvent based PU (Polyurethane) adhesive

    + TPU (Thermoplastic Polyurethane) Adhesive for Shoes

    + TPU (Thermoplastic Polyurethane) Shoe Adhesive

    + TPU (Thermoplastic Polyurethane) Footwear Adhesive

    + PU (Polyurethane) Shoe adhesive

    + Polyurethane based adhesive

    + Polyurethane adhesive

    + TPU adhesive manufacture

    + TPU adhesive supplier

     

    Advantage

    • TPU shoe material, soluble in solvent
    • Excellent initial adhesive strength
    • High bonding strength to a variety of substrate
    • Fast crystallization rate
    • Good heat resistance
    Application
    This series of material is suitable to be used as TPU shoe adhesive (solvent based adhesive), and used on textile Industry and others.
    Features
    This TPU shoe material for solvent based adhesive has good adhesion to a variety of substrates - TPU, Nylon, PVC, Leather, Synthetic Leather, Polyester, Fabrics,etc.
    Processing Method
    TPU shoe material can be dissolved by Solvent. The formulation of solvent based adhesive we generally suggested is one-third (1/3) each of MEK, Acetone and Toluene. In general, it depends on the customer's requirement. If you require TPU shoe material with faster volatility, you can use more Acetone. If you would like to reduce the cost by Toluene, the Max. Toluene in solvent is 30% ~ 35%. If Toluene is not allowed, you can use EAC instead. As to the actual formulation of TPU shoe adhesive, it should be adopted according to the characteristics of solvent and every customer's needs.
    ArticleType
    (POLYOL)
    Yellowing
    resistance
    Crystallization
    rate
    Activation
    Temp
    Tack
    Time
    (min)
    PVC vs.
    PVC,
    25℃
    Initial
    strength kg/3cm
    PVC vs.
    PVC
    After 5
    mins
    Max.
    Toluene
    % in
    Solvent
    Viscosity
    range
    (CPS/25℃)
    15% solid content
    in MEK
    TPUA-760Polyesterlittle yellowingvery fast55 ~ 655 ~ 1010 ~ 1630 ~ 35200 ~ 3500
    TPUA-1560Caprolactonelittle yellowingvery fast55 ~ 6525 ~ 5012 ~ 1830 ~ 35400 ~ 3500
    TPUA-142ACaprolactonelittle yellowingvery slow55 ~ 65over 8 hrs9 ~ 1530 ~ 35400 ~ 2400
    TPUA-173BAPolyesternon- yellowingvery fast55 ~ 655 ~ 108 ~ 1230 ~ 351600 ~ 2000
    TPUA-15-AA9APolyesterlittle yellowingfast60 ~ 758 ~ 129151600 ~ 2000
    TPUA-15-AA3CPolyesterlittle yellowingfast50 ~ 6558100200 ~ 600
    Notice: These values are based on the test of our present laboratory test specimens..

     

     ****We cordially invite you to access our following website to know more about our
     TPU for Solvent Based Adhesives -https://www.taiwanpu.com/productInfo/TPU for Solvent Based Adhesives/TPU for Solvent Based Adhesives

     

    Payment Details

    • Payment Terms:DA ,TT ,L/C ,PayPal