TPUCO IS YOUR BEST CHOICE
Spec
- Type:Round Belt
- SOLENOID BRITTLE POINT ℃:-35
- ABRASION RESISTANCE CYCLES ASTM D 746:39
- COMPRESSION SET AT 25% DEFORMATION % TABER e:6
- SHORE HARDNESS "A" SCALE ASTM D 2240:90±2
- ELONGATION% ASTM D 412:500
- ULTIMATE TENSILE STRENGTH PSI ASTM D 412:6400
- TEAR STRENGTH PLI ASTM D 412:600
Key Features
+ PU Round Belt Endless
+ PU Endless Round Cord
Advantage
- No mold charge for jointed PU belt
- Wide operating temperature range
- Exceptional abrasion resistance
- Resistance to oils, fuels and oxygen
- Good weather ability and high impact resistance
- Low compression set
- Very clear in operation
| Application | |||
|---|---|---|---|
| Transmission purposes of newspaper, textile machines, packaging machines, printing presses, food machinery, ceramic processing plants, cannery conveying equipment, wood-working machines, floor and roof tiles and industrial and paper industry machines. PU belt can be used in the facilities line, the glaze, polishing lines and transmission line widely . Cutted PU belts can be joined as the endless PU belts as required according to the drive wheel distance and pulley size. | |||
| Description | |||
|---|---|---|---|
| ITEM No. | Specification | ||
| BTY03134-2 | OD:3.2mm | x | L:134M |
| BTY03263-2 | OD:3.2mm | x | L:263.5M |
| BTY3140 | OD:3mm | x | L:140M |
| BTY3280 | OD:3mm | x | L:280M |
| BTY4190-75 | OD:4.75mm | x | L:190M |
| BTY4450-75 | OD:4.75mm | x | L:450M |
| BTY5450 | OD:5mm | x | L:450M |
| BTY5105 | OD:5mm | x | L:105M |
| BTY5214 | OD:5mm | x | L:214M |
| BTY5241 | OD:5mm | x | L:241M |
| BTY5300 | OD:5mm | x | L:300M |
| BTY5343 | OD:5mm | x | L:343M |
| BTY5600 | OD:5mm | x | L:660M |
| BTY5857 | OD:5mm | x | L:857M |
| BTY5870 | OD:5mm | x | L:870M |
| BTY5874 | OD:5mm | x | L:874M |
| BTY51915 | OD:5mm | x | L:915M |
| BTY5933 | OD:5mm | x | L:933M |
| BTY6424 | OD:6mm | x | L:424M |
| Physical Properties | ||||||
|---|---|---|---|---|---|---|
| SHORE HARDNESS ("A" SCALE) ASTM D 2240 | ULTIMATE TENSILE STRENGTH (kgf/cm2) PSI ASTM D 412 | ELONGATION (%) ASTM D 412 | TEAR STRENGTH (kgf/cm2) PLI ASTM D 412 | COMPRESSION SET (%) TABER e | ABRASION RESISTANCE CYCLES (mg) ASTM D 746 | SOLENOID BRITTLE (POINT ℃) |
| 90±2 | 6400 | 500 | 600 | 6 | 39 | -35 |
| Notice: These values are based on the test of our present laboratory test specimens. | ||||||
****We cordially invite you to access our following website to know more about our
PU endless round belt -
https://www.taiwanpu.com/productInfo/PU Round Belt-Endless/PU Round Belt-Endless
Payment Details
- Payment Terms:DA ,TT ,L/C
