Polyurethane base EPDM granule binder
- Model No.
- Made in
- Request for Quotation
We Supply PU Production Equipments
- Color :yellowish
- NCO content (％):1±0.5
- Density at 25℃ ( g/cm3 ):1.08
- Flash point (℃):> 200
- Viscosity at 25℃ (cps ):3500±500
+Rubber crumb binder
+EPDM granule binder
+Rubber tile binder
+Running track binder
+MDI based PUR binder
+Moisture curing PU binder
+1K PU binder
+Polyurethane resin binder
+PU resin binder
- MDI base binder
- Solvent free
- NCO: 11±0.5
- Vulcanization temperature: 120-160℃
- Demold time: 5-20 min.
- Good bonding performance
APU-7-800I is high temperature / pressure curing one component adhesive for granular and fibrous materials. It is suitable to make rubber crumb tiles for playground, running track and so on.
APU-7-800I is a PUR prepolymer containing isocyanate groups on the basic of MDI (diphenyl methane diisocyanate).
Density at 25℃
Viscosity at 25℃
Depending on the granular size, add 7-15% by weight APU-7-800I to granular. After fully mixing, pour into mold. Then vulcanize under 120-160℃ and pressure. Depending on the temperature and pressure, demold time will be 5-20 min.
20 kg red tin.
APU-7-800I is sensitive to humidity and therefore it should be kept in airtight drums at all times.
Notice: These values are based on the test of our present laboratory test specimens.
****We cordially invite you to access our following website to know more about our
rubber crumb adhesive - http://www.taiwanpu.com/products_detail.asp?seq=332